Motorized Shades | Solar Screens | Transparent Shades | Light Blocking Shades -

Air Traffic Control Towers

Delivering optically clear, scratch resistant,
solar control film shades for over 50 years.

• Meeting all FAA and Military and specifications in regard to film material, fit and operation, required for ATCTs.
• Providing Factory Certified Measuring and Installation, while offering flexible measuring and installation times, day or night, scheduled to your convenience. 100% guarantee on fit and operation.
• Offering both manual and motorized film shades with full tech support for local trades, both on and off the job site, in regard to automatic operations.

Is the time nearing to replace the Air Traffic Control Tower shades?

Although Solar Screen F-72SR Mylar shades offer a longer operational life than our competitor’s shades, exposure, cab conditions and daily use for any film shade will age its surface and hardware. Dust, grime, sun fading and smears caused by misuse are typical of a sun shade in its expected service life of 5 years. With Solar Screen’s hardware, materials and installation, the estimated service life of a properly maintained shade is extended out to more than seven years. How is that so?

• Solar Screen starts at the top with a steel roller containing our heavy duty spring-steel lift assembly on nylon sleeves. Next, hardened steel – making up the roller’s pin ends and their support brackets, combined with Solar Screen’s exclusive ‘extended shoulder’ idle end bracket, allows us to present a wear life much longer than anybody else has to offer.
• With the need at times to splice the film body on large shades, our competitors simply ‘tape’ their seams. Not only does our F-72 Scratch Resistant, Metalized Mylar film meet all FAA specs, Solar Screen is the only manufacturer that ‘sonically welds’ the seams. Again, adding to the service life of our shades.
• The final aspect of our cab shades is what our competitors seem to think is the least important – shade operation. You may have seen these problems already – misaligned hold-downs, fraying the pull-cord; cord-locks used improperly as a hold-down pulley, causing cord-lock wear; and cord-locks inconveniently placed. With our system, the primary hold-down of each shade utilizes our stainless steel and nylon ‘super pulleys,’ after which the pull-cord is directed toward the cord-lock.  Any pull-cord re-directions that are necessary to get to a convenient location are made by our super pulleys, insuring that the shade cord runs straight through the final cord-lock as friction-free as possible. No cord wear, long service life!